pppd: hang up

[ra-v]

Kod: Zaznacz cały

Nov 20 19:32:44 localhost kernel: PPP generic driver version 2.4.2
Nov 20 19:32:44 localhost pppd[2399]: pppd 2.4.4 started by root, uid 0
Nov 20 19:32:44 localhost pppd[2399]: Using interface ppp0
Nov 20 19:32:44 localhost pppd[2399]: Connect: ppp0 <--> /dev/ttyUSB3
Nov 20 19:32:44 localhost pppd[2399]: CHAP authentication succeeded
Nov 20 19:32:44 localhost pppd[2399]: CHAP authentication succeeded
Nov 20 19:32:46 localhost pppd[2399]: Could not determine remote IP address: defaulting to 10.64.64.64
Nov 20 19:32:46 localhost pppd[2399]: local  IP address 77.114.99.40
Nov 20 19:32:46 localhost pppd[2399]: remote IP address 10.64.64.64
Nov 20 19:32:46 localhost pppd[2399]: primary   DNS address 212.2.96.51
Nov 20 19:32:46 localhost pppd[2399]: secondary DNS address 212.2.96.52
Nov 20 19:56:17 localhost pppd[2399]: Modem hangup
Nov 20 19:56:17 localhost kernel: hub 1-0:1.0: port 5 disabled by hub (EMI?), re-enabling...
Nov 20 19:56:17 localhost kernel: usb 1-5: USB disconnect, address 3
Nov 20 19:56:17 localhost kernel: option: option_instat_callback: error -108
Nov 20 19:56:17 localhost kernel: option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
Nov 20 19:56:17 localhost kernel: option 1-5:1.0: device disconnected
Nov 20 19:56:17 localhost kernel: option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
Nov 20 19:56:17 localhost kernel: option 1-5:1.1: device disconnected
Nov 20 19:56:17 localhost kernel: option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
Nov 20 19:56:17 localhost kernel: option 1-5:1.2: device disconnected
Nov 20 19:56:17 localhost kernel: option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
Nov 20 19:56:17 localhost kernel: option 1-5:1.3: device disconnected
Nov 20 19:56:17 localhost pppd[2399]: Connect time 23.6 minutes.
Nov 20 19:56:17 localhost pppd[2399]: Sent 490331 bytes, received 3993975 bytes.
Nov 20 19:56:17 localhost pppd[2399]: Connection terminated.
Nov 20 19:56:18 localhost NetworkManager: <info>  (ttyUSB3): now unmanaged
Nov 20 19:56:18 localhost NetworkManager: <info>  (ttyUSB3): device state change: 3 -> 1
Nov 20 19:56:18 localhost NetworkManager: <info>  (ttyUSB3): cleaning up...
Nov 20 19:56:18 localhost NetworkManager: <info>  (ttyUSB3): taking down device.
Nov 20 19:56:18 localhost kernel: usb 1-5: new high speed USB device using ehci_hcd and address 4
Nov 20 19:56:18 localhost pppd[2399]: Exit.
Nov 20 19:56:18 localhost kernel: usb 1-5: device descriptor read/64, error -71
Nov 20 19:56:18 localhost kernel: usb 1-5: device descriptor read/64, error -71
Nov 20 19:56:18 localhost kernel: usb 1-5: new high speed USB device using ehci_hcd and address 5
Nov 20 19:56:18 localhost kernel: usb 1-5: device descriptor read/64, error -71
Nov 20 19:56:19 localhost kernel: usb 1-5: device descriptor read/64, error -71
Nov 20 19:56:19 localhost kernel: usb 1-5: new high speed USB device using ehci_hcd and address 6
Nov 20 19:56:19 localhost kernel: usb 1-5: device not accepting address 6, error -71
Nov 20 19:56:19 localhost kernel: usb 1-5: new high speed USB device using ehci_hcd and address 7
Nov 20 19:56:20 localhost kernel: usb 1-5: device not accepting address 7, error -71
Nov 20 19:56:20 localhost kernel: hub 1-0:1.0: unable to enumerate USB device on port 5
Nov 20 19:56:20 localhost kernel: usb 2-3: new full speed USB device using ohci_hcd and address 2
Nov 20 19:56:20 localhost kernel: usb 2-3: not running at top speed; connect to a high speed hub
Nov 20 19:56:20 localhost kernel: usb 2-3: New USB device found, idVendor=19d2, idProduct=0031
Nov 20 19:56:20 localhost kernel: usb 2-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
Nov 20 19:56:20 localhost kernel: usb 2-3: Product: ZTE CDMA Technologies MSM
Nov 20 19:56:20 localhost kernel: usb 2-3: Manufacturer: ZTE, Incorporated
Nov 20 19:56:20 localhost kernel: usb 2-3: SerialNumber: 1234567890ABCDEF
Nov 20 19:56:20 localhost kernel: usb 2-3: configuration #1 chosen from 1 choice
Nov 20 19:56:20 localhost kernel: option 2-3:1.0: GSM modem (1-port) converter detected
Nov 20 19:56:20 localhost kernel: usb 2-3: GSM modem (1-port) converter now attached to ttyUSB0
Nov 20 19:56:20 localhost kernel: option 2-3:1.1: GSM modem (1-port) converter detected
Nov 20 19:56:20 localhost kernel: usb 2-3: GSM modem (1-port) converter now attached to ttyUSB1
Nov 20 19:56:20 localhost kernel: option 2-3:1.2: GSM modem (1-port) converter detected
Nov 20 19:56:20 localhost kernel: usb 2-3: GSM modem (1-port) converter now attached to ttyUSB2
Nov 20 19:56:20 localhost kernel: option 2-3:1.3: GSM modem (1-port) converter detected
Nov 20 19:56:20 localhost kernel: usb 2-3: GSM modem (1-port) converter now attached to ttyUSB3
Nov 20 19:56:21 localhost NetworkManager: <info>  ttyUSB3: driver is 'option'.
Nov 20 19:56:21 localhost NetworkManager: <info>  Found new Modem device 'ttyUSB3'.
Nov 20 19:56:21 localhost NetworkManager: <info>  (ttyUSB3): exported as /org/freedesktop/Hal/devices/usb_device_19d2_31_1234567890ABCDEF_if3_serial_usb_3
Nov 20 19:56:25 localhost NetworkManager: <info>  (ttyUSB3): device state change: 1 -> 2
Nov 20 19:56:25 localhost NetworkManager: <info>  (ttyUSB3): deactivating device (reason: 2).
Nov 20 19:56:25 localhost NetworkManager: nm_system_device_flush_ip4_routes_with_iface: assertion `iface_idx >= 0' failed
Nov 20 19:56:25 localhost NetworkManager: nm_system_device_flush_ip4_addresses_with_iface: assertion `iface_idx >= 0' failed
Nov 20 19:56:25 localhost NetworkManager: <info>  (ttyUSB3): device state change: 2 -> 3
Nov 20 19:56:36 localhost pppd[3168]: pppd 2.4.4 started by root, uid 0
Nov 20 19:56:36 localhost pppd[3168]: Using interface ppp0
Nov 20 19:56:36 localhost pppd[3168]: Connect: ppp0 <--> /dev/ttyUSB3
Nov 20 19:56:36 localhost pppd[3168]: CHAP authentication succeeded
Nov 20 19:56:36 localhost pppd[3168]: CHAP authentication succeeded
Nov 20 19:56:36 localhost pppd[3168]: Could not determine remote IP address: defaulting to 10.64.64.64
Nov 20 19:56:36 localhost pppd[3168]: local  IP address 95.41.45.205
Nov 20 19:56:36 localhost pppd[3168]: remote IP address 10.64.64.64
Nov 20 19:56:36 localhost pppd[3168]: primary   DNS address 212.2.96.54
Nov 20 19:56:36 localhost pppd[3168]: secondary DNS address 212.2.96.52

Zdaża się czasami (raz na 1-3 godziny) lub dość często (3 minuty) że transfer jest dobry (jak na EDGE) i następuje rozłączenie (odłożenie słuchawki). Modem ustawiam przy pomocy usb_modeswitch, natomiast łącze się wvdial'em.
Czym to jest spowodowane? Czy można ustawić w skrypcie coś żeby łączył się ponownie po odłożeniu słuchawki, albo w ogóle jej nie odkładał?

[raven18]

Kod: Zaznacz cały

Nov 20 19:56:18 localhost NetworkManager: <info>  (ttyUSB3): now unmanaged
Nov 20 19:56:18 localhost NetworkManager: <info>  (ttyUSB3): device state change: 3 -> 1
Nov 20 19:56:18 localhost NetworkManager: <info>  (ttyUSB3): cleaning up...
Nov 20 19:56:18 localhost NetworkManager: <info>  (ttyUSB3): taking down device.

NetworkManager rozłącza.

[ra-v]

Ok dzięki, sprawdzymy jak będzie chodziło;) Jeśli w tydzień nic się nie stanie to temat będzie zamknięty.

Ale musiałem usunąć dowiązania /etc/rc.*/K90network, bo w serviceconf (Ustawienia/Usługi) niby był wyłączony Network Manager, alpet dla GNOME również, ale nadal się uruchamiał. Dziwna sprawa.

[raven18]

Ano właśnie, najlepiej go usunąć.

[ra-v]

Kod: Zaznacz cały

Nov 21 11:49:00 localhost kernel: PPP generic driver version 2.4.2
Nov 21 11:49:00 localhost pppd[3654]: Using interface ppp0
Nov 21 11:49:00 localhost pppd[3654]: Connect: ppp0 <--> /dev/ttyUSB3
Nov 21 11:49:00 localhost pppd[3654]: CHAP authentication succeeded
Nov 21 11:49:00 localhost pppd[3654]: CHAP authentication succeeded
Nov 21 11:49:19 localhost pppd[3654]: Could not determine remote IP address: defaulting to 10.64.64.64
Nov 21 11:49:19 localhost pppd[3654]: local  IP address 77.115.22.49
Nov 21 11:49:19 localhost pppd[3654]: remote IP address 10.64.64.64
Nov 21 11:49:19 localhost pppd[3654]: primary   DNS address 10.11.12.13
Nov 21 11:49:19 localhost pppd[3654]: secondary DNS address 10.11.12.14
Nov 21 12:04:42 localhost kernel: hub 1-0:1.0: port 5 disabled by hub (EMI?), re-enabling...
Nov 21 12:04:42 localhost pppd[3654]: Modem hangup
Nov 21 12:04:42 localhost pppd[3654]: Connect time 15.4 minutes.
Nov 21 12:04:42 localhost pppd[3654]: Sent 1300261 bytes, received 15823576 bytes.
Nov 21 12:04:42 localhost kernel: usb 1-5: USB disconnect, address 3
Nov 21 12:04:42 localhost kernel: option: option_instat_callback: error -108
Nov 21 12:04:42 localhost kernel: option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
Nov 21 12:04:42 localhost kernel: option 1-5:1.0: device disconnected
Nov 21 12:04:42 localhost kernel: option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
Nov 21 12:04:42 localhost kernel: option 1-5:1.1: device disconnected
Nov 21 12:04:42 localhost kernel: option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
Nov 21 12:04:42 localhost kernel: option 1-5:1.2: device disconnected
Nov 21 12:04:42 localhost kernel: option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
Nov 21 12:04:42 localhost kernel: option 1-5:1.3: device disconnected
Nov 21 12:04:42 localhost pppd[3654]: Connection terminated.
Nov 21 12:04:42 localhost kernel: usb 1-5: new high speed USB device using ehci_hcd and address 4
Nov 21 12:04:42 localhost pppd[3654]: Exit.
Nov 21 12:04:42 localhost kernel: usb 1-5: device descriptor read/64, error -71
Nov 21 12:04:43 localhost kernel: usb 1-5: New USB device found, idVendor=19d2, idProduct=0031
Nov 21 12:04:43 localhost kernel: usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
Nov 21 12:04:43 localhost kernel: usb 1-5: Product: ZTE CDMA Technologies MSM
Nov 21 12:04:43 localhost kernel: usb 1-5: Manufacturer: ZTE, Incorporated
Nov 21 12:04:43 localhost kernel: usb 1-5: SerialNumber: 1234567890ABCDEF
Nov 21 12:04:43 localhost kernel: usb 1-5: configuration #1 chosen from 1 choice
Nov 21 12:04:43 localhost kernel: option 1-5:1.0: GSM modem (1-port) converter detected
Nov 21 12:04:43 localhost kernel: usb 1-5: GSM modem (1-port) converter now attached to ttyUSB0
Nov 21 12:04:43 localhost kernel: option 1-5:1.1: GSM modem (1-port) converter detected
Nov 21 12:04:43 localhost kernel: usb 1-5: GSM modem (1-port) converter now attached to ttyUSB1
Nov 21 12:04:43 localhost kernel: option 1-5:1.2: GSM modem (1-port) converter detected
Nov 21 12:04:43 localhost kernel: usb 1-5: GSM modem (1-port) converter now attached to ttyUSB2
Nov 21 12:04:43 localhost kernel: option 1-5:1.3: GSM modem (1-port) converter detected
Nov 21 12:04:43 localhost kernel: usb 1-5: GSM modem (1-port) converter now attached to ttyUSB3
Nov 21 12:04:43 localhost kernel: hub 1-0:1.0: port 5 disabled by hub (EMI?), re-enabling...
Nov 21 12:04:43 localhost kernel: usb 1-5: USB disconnect, address 4
Nov 21 12:04:43 localhost kernel: option: option_instat_callback: error -108
Nov 21 12:04:43 localhost kernel: option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
Nov 21 12:04:43 localhost kernel: option 1-5:1.0: device disconnected
Nov 21 12:04:43 localhost kernel: option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
Nov 21 12:04:43 localhost kernel: option 1-5:1.1: device disconnected
Nov 21 12:04:43 localhost kernel: option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
Nov 21 12:04:43 localhost kernel: option 1-5:1.2: device disconnected
Nov 21 12:04:43 localhost kernel: option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
Nov 21 12:04:43 localhost kernel: option 1-5:1.3: device disconnected
Nov 21 12:04:43 localhost kernel: usb 1-5: new high speed USB device using ehci_hcd and address 5
Nov 21 12:04:43 localhost kernel: usb 1-5: device descriptor read/64, error -71
Nov 21 12:04:43 localhost kernel: usb 1-5: device descriptor read/64, error -71
Nov 21 12:04:43 localhost kernel: usb 1-5: new high speed USB device using ehci_hcd and address 6
Nov 21 12:04:44 localhost kernel: usb 1-5: device not accepting address 6, error -71
Nov 21 12:04:44 localhost kernel: usb 1-5: new high speed USB device using ehci_hcd and address 7
Nov 21 12:04:44 localhost kernel: usb 1-5: device descriptor read/8, error -71
Nov 21 12:04:44 localhost kernel: usb 1-5: device descriptor read/8, error -71
Nov 21 12:04:44 localhost kernel: usb 1-5: new high speed USB device using ehci_hcd and address 8
Nov 21 12:04:45 localhost kernel: usb 1-5: device not accepting address 8, error -71
Nov 21 12:04:45 localhost kernel: hub 1-0:1.0: unable to enumerate USB device on port 5
Nov 21 12:04:45 localhost kernel: usb 2-3: new full speed USB device using ohci_hcd and address 2
Nov 21 12:04:45 localhost kernel: usb 2-3: not running at top speed; connect to a high speed hub
Nov 21 12:04:45 localhost kernel: usb 2-3: New USB device found, idVendor=19d2, idProduct=0031
Nov 21 12:04:45 localhost kernel: usb 2-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
Nov 21 12:04:45 localhost kernel: usb 2-3: Product: ZTE CDMA Technologies MSM
Nov 21 12:04:45 localhost kernel: usb 2-3: Manufacturer: ZTE, Incorporated
Nov 21 12:04:45 localhost kernel: usb 2-3: SerialNumber: 1234567890ABCDEF
Nov 21 12:04:45 localhost kernel: usb 2-3: configuration #1 chosen from 1 choice
Nov 21 12:04:45 localhost kernel: option 2-3:1.0: GSM modem (1-port) converter detected
Nov 21 12:04:45 localhost kernel: usb 2-3: GSM modem (1-port) converter now attached to ttyUSB0
Nov 21 12:04:45 localhost kernel: option 2-3:1.1: GSM modem (1-port) converter detected
Nov 21 12:04:45 localhost kernel: usb 2-3: GSM modem (1-port) converter now attached to ttyUSB1
Nov 21 12:04:45 localhost kernel: option 2-3:1.2: GSM modem (1-port) converter detected
Nov 21 12:04:45 localhost kernel: usb 2-3: GSM modem (1-port) converter now attached to ttyUSB2
Nov 21 12:04:45 localhost kernel: option 2-3:1.3: GSM modem (1-port) converter detected
Nov 21 12:04:45 localhost kernel: usb 2-3: GSM modem (1-port) converter now attached to ttyUSB3
Nov 21 12:05:05 localhost pppd[4433]: pppd 2.4.4 started by root, uid 0
Nov 21 12:05:05 localhost pppd[4433]: Using interface ppp0
Nov 21 12:05:05 localhost pppd[4433]: Connect: ppp0 <--> /dev/ttyUSB3
Nov 21 12:05:05 localhost pppd[4433]: CHAP authentication succeeded
Nov 21 12:05:05 localhost pppd[4433]: CHAP authentication succeeded
Nov 21 12:05:06 localhost pppd[4433]: Could not determine remote IP address: defaulting to 10.64.64.64
Nov 21 12:05:06 localhost pppd[4433]: local  IP address 95.41.233.135
Nov 21 12:05:06 localhost pppd[4433]: remote IP address 10.64.64.64
Nov 21 12:05:06 localhost pppd[4433]: primary   DNS address 212.2.96.54
Nov 21 12:05:06 localhost pppd[4433]: secondary DNS address 212.2.96.52

a jednak jest to samo, choć bez NetworkManagera

[raven18]

To niby może być problem z portami, jeśli nie sprawdzałeś to podłącz pod inny:
http://www.murga-linux.com/puppy/viewto ... ea48020e68
Ewentualnie, jeśli nic to nie da, możesz napisać skrypt który będzie automatycznie łączył po rozłączeniu.

[berni]

Tutaj jest podany sposób na sprawdzanie łączenia co minutę, wprawdzie jest to przykład z modemem Siemens ES75 ale może go przerobisz dla własnych potrzeb:
http://www.mandrivalinux.eu/showthread. ... b&t=196779

[ra-v]

Ok, dzięki za (p)odpowiedzi.

Zrobiłem pętlę we własnym skrypcie. Coś w stylu

Kod: Zaznacz cały

while [ 1 ]; do
  wvdial iplus internet
  sleep 4
done.

[raven18]

Można też na pinga zrobić, jakoś tak:

Kod: Zaznacz cały

while :
do
sleep 5 &&
if [ `ping -c1 www.google.pl | grep from | wc -l` -eq 0 ]
then
echo nie działa
else
echo ok
fi
done

[ra-v]

Odpaliłem również polecenie call pppd iplus, czyli przy pomocy chata, ale też czesam rozłącza neta.

[ra-v]

# pppd call iplus

Kod: Zaznacz cały

Nov 26 18:03:09 localhost pppd[8430]: Connect: ppp0 <--> /dev/ttyUSB3
Nov 26 18:03:10 localhost pppd[8430]: Hangup (SIGHUP)
Nov 26 18:03:10 localhost kernel: hub 1-0:1.0: port 5 disabled by hub (EMI?), re-enabling...
Nov 26 18:03:10 localhost kernel: usb 1-5: USB disconnect, address 81
Nov 26 18:03:10 localhost kernel: option: option_instat_callback: error -108
Nov 26 18:03:10 localhost kernel: option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
Nov 26 18:03:10 localhost kernel: option 1-5:1.0: device disconnected
Nov 26 18:03:10 localhost kernel: option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
Nov 26 18:03:10 localhost kernel: option 1-5:1.1: device disconnected
Nov 26 18:03:10 localhost kernel: option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
Nov 26 18:03:10 localhost kernel: option 1-5:1.2: device disconnected
Nov 26 18:03:10 localhost kernel: option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
Nov 26 18:03:10 localhost kernel: option 1-5:1.3: device disconnected
Nov 26 18:03:10 localhost pppd[8430]: Modem hangup
Nov 26 18:03:10 localhost pppd[8430]: Connection terminated.
Nov 26 18:03:11 localhost kernel: usb 1-5: new high speed USB device using ehci_hcd and address 82
Nov 26 18:03:11 localhost kernel: usb 1-5: New USB device found, idVendor=19d2, idProduct=0031
Nov 26 18:03:11 localhost kernel: usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
Nov 26 18:03:11 localhost kernel: usb 1-5: Product: ZTE CDMA Technologies MSM
Nov 26 18:03:11 localhost kernel: usb 1-5: Manufacturer: ZTE, Incorporated
Nov 26 18:03:11 localhost kernel: usb 1-5: SerialNumber: 1234567890ABCDEF
Nov 26 18:03:11 localhost kernel: usb 1-5: configuration #1 chosen from 1 choice
Nov 26 18:03:11 localhost kernel: option 1-5:1.0: GSM modem (1-port) converter detected
Nov 26 18:03:11 localhost kernel: usb 1-5: GSM modem (1-port) converter now attached to ttyUSB0
Nov 26 18:03:11 localhost kernel: option 1-5:1.1: GSM modem (1-port) converter detected
Nov 26 18:03:11 localhost kernel: usb 1-5: GSM modem (1-port) converter now attached to ttyUSB1
Nov 26 18:03:11 localhost kernel: option 1-5:1.2: GSM modem (1-port) converter detected
Nov 26 18:03:11 localhost kernel: usb 1-5: GSM modem (1-port) converter now attached to ttyUSB2
Nov 26 18:03:11 localhost kernel: option 1-5:1.3: GSM modem (1-port) converter detected
Nov 26 18:03:11 localhost kernel: usb 1-5: GSM modem (1-port) converter now attached to ttyUSB4
Nov 26 18:03:11 localhost kernel: hub 1-0:1.0: port 5 disabled by hub (EMI?), re-enabling...
Nov 26 18:03:11 localhost kernel: usb 1-5: USB disconnect, address 82
Nov 26 18:03:11 localhost kernel: option: option_instat_callback: error -108
Nov 26 18:03:11 localhost kernel: option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
Nov 26 18:03:11 localhost kernel: option 1-5:1.0: device disconnected
Nov 26 18:03:11 localhost kernel: option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
Nov 26 18:03:11 localhost kernel: option 1-5:1.1: device disconnected
Nov 26 18:03:11 localhost kernel: option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
Nov 26 18:03:11 localhost kernel: option 1-5:1.2: device disconnected
Nov 26 18:03:11 localhost kernel: option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4
Nov 26 18:03:11 localhost kernel: option 1-5:1.3: device disconnected
Nov 26 18:03:11 localhost pulseaudio[2239]: module-hal-detect.c: Error getting capability: org.freedesktop.Hal.NoSuchDevice: No device with id /org/freedesktop/Hal/devices/usb_device_19d2_31_1234567890ABCDEF_if0_serial_usb_0
Nov 26 18:03:11 localhost pulseaudio[2239]: module-hal-detect.c: Error getting capability: org.freedesktop.Hal.NoSuchDevice: No device with id /org/freedesktop/Hal/devices/usb_device_19d2_31_1234567890ABCDEF_if1_serial_usb_1
Nov 26 18:03:11 localhost kernel: usb 1-5: new high speed USB device using ehci_hcd and address 83
Nov 26 18:03:11 localhost kernel: usb 1-5: device descriptor read/all, error -71
Nov 26 18:03:11 localhost kernel: usb 1-5: new high speed USB device using ehci_hcd and address 84
Nov 26 18:03:12 localhost pppd[8430]: Exit.

konkretnie

Kod: Zaznacz cały

Nov 26 18:03:10 localhost kernel: hub 1-0:1.0: port 5 disabled by hub (EMI?), re-enabling...

i

Kod: Zaznacz cały

Nov 26 18:03:11 localhost pulseaudio[2239]: module-hal-detect.c: Error getting capability: org.freedesktop.Hal.NoSuchDevice: No device with id /org/freedesktop/Hal/devices/usb_device_19d2_31_1234567890ABCDEF_if0_serial_usb_0
Nov 26 18:03:11 localhost pulseaudio[2239]: module-hal-detect.c: Error getting capability: org.freedesktop.Hal.NoSuchDevice: No device with id /org/freedesktop/Hal/devices/usb_device_19d2_31_1234567890ABCDEF_if1_serial_usb_1

co tu się dzieje? co trzeba zrobić?

[raven18]

Co do tego pierwszego to jest jakiś problem z hardwerem, wpisz w google

Kod: Zaznacz cały

disabled by hub (EMI?), re-enabling

Fedora 10? Może skompiluj se nowszego kernela.
Co do drugiego błędu to pulseaudio, masz w ogóle dźwięk?

[ra-v]

Mam 2.6.30.9 (na 2.6.31 w ogóle nie odpalał modemu). Na 2.6.30 (bez .9) wywalał czasami błąd jądra.
Reasumując na aktualnym 2.6.30.9 chodzi najlepiej, ale na każdym rozłącza w ten sposób

Dźwięk oczywiście mam i nie narzekam.

[ra-v]

@raven18 - moze faktycznie częściowo jest problem z portami. Teraz przełączyłem na te z tyłu obudowy i tych errorów nie ma. Czasami jednak zrobi hang up ale taki trochę dziwny - wysyła dane, nie odbiera i po minucie hang up, albo od razu po restarcie (czas 0.1ms). Ale może TTTM (ten typ tak ma)

[berni]

W podpisie masz "LINUX FEDORA 10 ..." . Czy próbowałeś już łączyć się z internetem poprzez najnowszą wersję Fedora 12 ? Ja mam już ją zainstalowaną - jest to wersja LiveCD (z Gnome)- wgrana przeze mnie na HDD. Ten post jest właśnie z Fedorki 12 Constantine i UMTSmon.

Kod: Zaznacz cały

miko@localhost ~]$ uname -a
Linux localhost.localdomain 2.6.31.5-127.fc12.i686 #1 SMP Sat Nov 7 21:41:45 EST 2009 i686 i686 i386 GNU/Linux

Jest tutaj NetworkManager lecz stwarza problemy, przy pierwszym skonfigurowaniu połączenia internetowego łączy z siecią w dziwny sposób. W pliku /etc/resolv.conf generuje taki wpis:

Kod: Zaznacz cały

# Generated by NetworkManager
nameserver 4.2.2.1
nameserver 4.2.2.2

a w pliku /var/log/messages pojawiają się wpisy:

Kod: Zaznacz cały

Dec 13 09:55:22 localhost pppd[1678]: Plugin /usr/lib/pppd/2.4.4/nm-pppd-plugin.so loaded.
Dec 13 09:55:22 localhost kernel: PPP generic driver version 2.4.2
Dec 13 09:55:22 localhost pppd[1678]: pppd 2.4.4 started by root, uid 0
Dec 13 09:55:22 localhost pppd[1678]: Using interface ppp0
Dec 13 09:55:22 localhost pppd[1678]: Connect: ppp0 <--> /dev/ttyUSB0
Dec 13 09:55:22 localhost pppd[1678]: CHAP authentication succeeded
Dec 13 09:55:22 localhost pppd[1678]: CHAP authentication succeeded
Dec 13 09:55:22 localhost kernel: PPP Deflate Compression module registered
Dec 13 09:55:29 localhost pppd[1678]: Could not determine remote IP address: defaulting to 10.64.64.64
Dec 13 09:55:29 localhost pppd[1678]: local  IP address 188.33.11.205
Dec 13 09:55:29 localhost pppd[1678]: remote IP address 10.64.64.64
Dec 13 09:55:29 localhost pppd[1678]: primary   DNS address 10.11.12.13
Dec 13 09:55:29 localhost pppd[1678]: secondary DNS address 10.11.12.14
Dec 13 09:55:29 localhost NetworkManager: <info>  PPP manager(IP Config Get) reply received.
Dec 13 09:55:29 localhost NetworkManager: <info>  Activation (ttyUSB0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Dec 13 09:55:29 localhost NetworkManager: <info>  Activation (ttyUSB0) Stage 4 of 5 (IP4 Configure Get) started...
Dec 13 09:55:29 localhost NetworkManager: <info>  Activation (ttyUSB0) Stage 5 of 5 (IP Configure Commit) scheduled...
Dec 13 09:55:29 localhost NetworkManager: <info>  Activation (ttyUSB0) Stage 4 of 5 (IP4 Configure Get) complete.
Dec 13 09:55:29 localhost NetworkManager: <info>  Activation (ttyUSB0) Stage 5 of 5 (IP Configure Commit) started...
Dec 13 09:55:30 localhost NetworkManager: <info>  (ttyUSB0): device state change: 7 -> 8 (reason 0)
Dec 13 09:55:30 localhost NetworkManager: <info>  Policy set 'Play Online Domyślne' (ppp0) as default for routing and DNS.
Dec 13 09:55:30 localhost NetworkManager: <info>  Activation (ttyUSB0) successful, device activated.
Dec 13 09:55:30 localhost NetworkManager: <info>  Activation (ttyUSB0) Stage 5 of 5 (IP Configure Commit) complete.

Co dziwne, ja mam Playa i powinny być inne DNS-y, ale jest połączenie i strony wczytują się prawidłowo. Niestety po rozłączeniu (bez fizycznego odłączenia modemu) i ponownym uruchomieniu NM już nie łączy, trzeba zrestartować kompa. Dlatego też wgrałem pakiet rpm UMTSmon pobrany z:
http://download.opensuse.org/repositori ... a_12/i386/
i dzięki temu, po odpowiednich modyfikacjach, łączę się z siecią tym programem z poziomu zwykłego użytkownika. Samo połączenie czasami zerwie, a program UMTSmon zminimalizowany na bieżąco pokazuje wartość CSQ i w tej chwili mam wskażnik 8.
Jeśli masz możliwość to sprawdź swój modem w najnowszej Fedorce 12, w wersji LiveCD.

[ra-v]

Problem jakoś po przełączeniu na tylne porty zamiast przednich zniknął. A nie chce mi się instalować nowej Fedory jak 10 dobrze chodzi.