problem z modemem huawei E230 na Ubunti 10.4

[ziomal1492]

witam
proszę wszystkich o pomoc, gdyż mój modem huawei e230 na Ubuntu 10.4 nie łączy się z internetem... Problem ten nie występuje na windowsie i polega on na tym, że po skonfigurowaniu połączenia w NetworkManager nie łączy mnie z internetem... modem mam w iplusie... Ubuntu wykrywa mój modem i nie mam pojęcia dlaczego nie chce mnie połączyć. Proszę o wszelką pomoc gdyż bardzo chciałbym stać się jednym z zadowolonych użytkowników Ubuntu.

[Patryk]

SOA#1.

Rozumiem, że modem jest widziany przez system, tylko nie chce się połączyć ?

[ziomal1492]

tak...

[ra-v]

Zapodaj

Kod: Zaznacz cały

lsusb
ls /dev/ttyUSB*
ls /dev/ttyHS*

Wyciągnij modem i włóż i zapodaj

Kod: Zaznacz cały

dmesg

Gdyby co kliknij na mój link WWW, tam zobaczysz instrukcje być mozę do twojego modemu. Prawdopodobnie będziesz musiał zainstalować usb_modeswitch (wg manuala obsługuje Twój modem).

[Patryk]

tak...

APN dobrze ustawiony ?

[ Dodano: 2010-08-28, 09:39 ]

Prawdopodobnie będziesz musiał zainstalować usb_modeswitch (wg manuala obsługuje Twój modem).

Jak jest widziany przez system to znaczy, że jest już w trybie modemu.
Jakby było inaczej, to Network Manager bo go nie widział i nie pokazywał opcji połaczenia komórkowego.

[ziomal1492]

Apn mam www.plusgsm.pl jak podłączam telefon komórkowy k800i bez problemu mnie łączy... A jak konfigurowałem połączenie to tam było skonfiguruj połączenie dla modemu (czy coś takiego) i nie mogłem tego rozwinąć i było "any".

[ Dodano: 2010-08-28, 13:50 ]
I teraz musze od nowa ubu zainstalować bo się wkurzyłem i wywaliłem ;D Ale zaraz to zrobię

[ Komentarz dodany przez: YaHooo: 2010-08-28, 14:00 ]
<font color=orange>Poprawa pisowni.</font>

[ Dodano: 2010-08-28, 16:34 ]
szymon@szymon:~$ ls /dev/ttyUSB*
/dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2
szymon@szymon:~$ ls/dev/ttyHS*
bash: ls/dev/ttyHS*: No such file or directory
a to kawałek kodu (resztę ucięło) po wpisani polecenia dmesg
[ 0.192512] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.192515] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.192519] pci_bus 0000:01: resource 1 mem: [0xfca00000-0xfeafffff]
[ 0.192522] pci_bus 0000:01: resource 2 pref mem [0xe7f00000-0xf7efffff]
[ 0.192586] NET: Registered protocol family 2
[ 0.192735] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.193146] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.193260] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.193477] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.193487] TCP reno registered
[ 0.193712] NET: Registered protocol family 1
[ 0.193758] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.193866] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[ 0.193888] pci 0000:01:00.0: Boot video device
[ 0.194234] cpufreq-nforce2: No nForce2 chipset.
[ 0.194292] Scanning for low memory corruption every 60 seconds
[ 0.194495] audit: initializing netlink socket (disabled)
[ 0.194521] type=2000 audit(1283014352.193:1): initialized
[ 0.204708] Trying to unpack rootfs image as initramfs...
[ 0.218042] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.220165] VFS: Disk quotas dquot_6.5.2
[ 0.220289] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.225646] fuse init (API version 7.13)
[ 0.225868] msgmni has been set to 977
[ 0.226355] alg: No test for stdrng (krng)
[ 0.226501] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.226507] io scheduler noop registered
[ 0.226510] io scheduler anticipatory registered
[ 0.226513] io scheduler deadline registered
[ 0.226578] io scheduler cfq registered (default)
[ 0.226776] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.226815] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.226982] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.226989] ACPI: Power Button [PWRB]
[ 0.227065] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.227069] ACPI: Power Button [PWRF]
[ 0.227512] processor LNXCPU:00: registered as cooling_device0
[ 0.238380] isapnp: Scanning for PnP cards...
[ 0.250298] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.250437] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.251157] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.252828] brd: module loaded
[ 0.253693] loop: module loaded
[ 0.253918] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.254196] alloc irq_desc for 20 on node -1
[ 0.254201] alloc kstat_irqs on node -1
[ 0.254213] pata_acpi 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 0.254290] pata_acpi 0000:00:0f.0: PCI INT B disabled
[ 0.254328] pata_acpi 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.254367] pata_acpi 0000:00:0f.1: PCI INT A disabled
[ 0.254859] Fixed MDIO Bus: probed
[ 0.254916] PPP generic driver version 2.4.2
[ 0.255047] tun: Universal TUN/TAP device driver, 1.6
[ 0.255051] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 0.255236] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.255288] alloc irq_desc for 21 on node -1
[ 0.255291] alloc kstat_irqs on node -1
[ 0.255303] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 0.255332] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 0.255420] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 0.255512] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfebff800
[ 0.301505] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 0.301770] usb usb1: configuration #1 chosen from 1 choice
[ 0.301826] hub 1-0:1.0: USB hub found
[ 0.301850] hub 1-0:1.0: 8 ports detected
[ 0.301957] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.301987] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.302076] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.302090] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 0.302200] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 0.302238] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d800
[ 0.302439] usb usb2: configuration #1 chosen from 1 choice
[ 0.302491] hub 2-0:1.0: USB hub found
[ 0.302507] hub 2-0:1.0: 2 ports detected
[ 0.302593] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.302606] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 0.302700] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 0.302735] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000dc00
[ 0.302914] usb usb3: configuration #1 chosen from 1 choice
[ 0.302962] hub 3-0:1.0: USB hub found
[ 0.302977] hub 3-0:1.0: 2 ports detected
[ 0.303055] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.303068] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 0.303168] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 0.303204] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000
[ 0.303389] usb usb4: configuration #1 chosen from 1 choice
[ 0.303440] hub 4-0:1.0: USB hub found
[ 0.303457] hub 4-0:1.0: 2 ports detected
[ 0.303543] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.303557] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 0.303657] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 0.303693] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000ec00
[ 0.303869] usb usb5: configuration #1 chosen from 1 choice
[ 0.303919] hub 5-0:1.0: USB hub found
[ 0.303934] hub 5-0:1.0: 2 ports detected
[ 0.304103] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.309738] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.309769] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.310102] mice: PS/2 mouse device common for all mice
[ 0.310364] rtc_cmos 00:02: RTC can wake from S4
[ 0.310477] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.310541] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 0.310755] device-mapper: uevent: version 1.0.3
[ 0.311043] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
[ 0.313701] device-mapper: multipath: version 1.1.0 loaded
[ 0.313710] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.314094] EISA: Probing bus 0 at eisa.0
[ 0.314142] EISA: Detected 0 cards.
[ 0.315933] cpuidle: using governor ladder
[ 0.315939] cpuidle: using governor menu
[ 0.316694] TCP cubic registered
[ 0.316918] NET: Registered protocol family 10
[ 0.317760] lo: Disabled Privacy Extensions
[ 0.318210] NET: Registered protocol family 17
[ 0.318340] Using IPI No-Shortcut mode
[ 0.318543] PM: Resume from disk failed.
[ 0.318567] registered taskstats version 1
[ 0.318916] Magic number: 6:154:895
[ 0.318990] uhci_hcd 0000:00:10.0: hash matches
[ 0.319070] rtc_cmos 00:02: setting system clock to 2010-08-28 16:52:32 UTC (1283014352)
[ 0.319077] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.319079] EDD information not available.
[ 0.338196] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.657485] usb 1-6: new high speed USB device using ehci_hcd and address 2
[ 0.853248] Freeing initrd memory: 7780k freed
[ 0.913358] isapnp: No Plug & Play device found
[ 0.913421] Freeing unused kernel memory: 660k freed
[ 0.914890] Write protecting the kernel text: 4680k
[ 0.914929] Write protecting the kernel read-only data: 1840k
[ 0.918445] usb 1-6: configuration #1 chosen from 1 choice
[ 0.958712] udev: starting version 151
[ 1.029588] usb 1-7: new high speed USB device using ehci_hcd and address 3
[ 1.166893] usb 1-7: configuration #1 chosen from 1 choice
[ 1.309260] Floppy drive(s): fd0 is 1.44M
[ 1.328963] FDC 0 is a post-1991 82077
[ 1.332414] pata_via 0000:00:0f.1: version 0.3.4
[ 1.332445] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.345099] scsi0 : pata_via
[ 1.356111] scsi1 : pata_via
[ 1.359197] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.359203] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.359429] sata_via 0000:00:0f.0: version 2.4
[ 1.359447] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.359510] sata_via 0000:00:0f.0: routed to hard irq line 5
[ 1.368995] scsi2 : sata_via
[ 1.369985] scsi3 : sata_via
[ 1.370100] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd000 bmdma 0xc400 irq 20
[ 1.370104] ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc800 bmdma 0xc408 irq 20
[ 1.377847] Initializing USB Mass Storage driver...
[ 1.400801] scsi5 : SCSI emulation for USB Mass Storage devices
[ 1.401334] usb-storage: device found at 2
[ 1.401339] usb-storage: waiting for device to settle before scanning
[ 1.403094] scsi8 : SCSI emulation for USB Mass Storage devices
[ 1.403498] usbcore: registered new interface driver usb-storage
[ 1.403505] USB Mass Storage support registered.
[ 1.403814] usb-storage: device found at 3
[ 1.403819] usb-storage: waiting for device to settle before scanning
[ 1.521745] ata1.00: ATA-6: WDC WD1600BB-55GUC0, 08.02D08, max UDMA/100
[ 1.521749] ata1.00: 312581808 sectors, multi 16: LBA48
[ 1.537572] ata1.00: configured for UDMA/100
[ 1.537798] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BB-55G 08.0 PQ: 0 ANSI: 5
[ 1.538123] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.538920] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.539026] sd 0:0:0:0: [sda] Write Protect is off
[ 1.539031] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.539086] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.539461] sda: sda1 sda2 < sda5
[ 1.576029] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.582371] sda6 sda7 > sda3
[ 1.590634] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.708421] ata2.01: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL11, max UDMA/33
[ 1.724288] ata2.01: configured for UDMA/33
[ 1.734070] scsi 1:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL11 PQ: 0 ANSI: 5
[ 1.746757] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.746766] Uniform CD-ROM driver Revision: 3.20
[ 1.747480] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 1.747906] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 2.383652] ata3.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133
[ 2.383658] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.397220] ata3.00: configured for UDMA/133
[ 2.397438] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 2.397760] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.398384] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.398492] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.398497] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.398553] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.398911] sdb: sdb2 < sdb5 sdb6 sdb7 >
[ 2.433234] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.600035] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 2.626587] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 2.626683] alloc irq_desc for 23 on node -1
[ 2.626688] alloc kstat_irqs on node -1
[ 2.626701] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.627846] eth0: VIA Rhine II at 0xfebffc00, 00:13:8f:31:36:cc, IRQ 23.
[ 2.628572] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[ 3.581460] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 5.198349] Adding 2964472k swap on /dev/sda6. Priority:-1 extents:1 across:2964472k
[ 5.604386] udev: starting version 151
[ 6.442093] usb-storage: device scan complete
[ 6.442175] usb-storage: device scan complete
[ 6.445256] scsi 5:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 6.445898] scsi 8:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 6.447777] scsi 8:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 6.457570] scsi 8:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 6.484698] scsi 8:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 6.490087] lp: driver loaded but no devices found
[ 6.515390] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 6.515997] sd 8:0:0:1: Attached scsi generic sg4 type 0
[ 6.529243] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 6.539026] sd 8:0:0:1: [sdd] Attached SCSI removable disk
[ 6.540743] sd 8:0:0:2: Attached scsi generic sg5 type 0
[ 6.541143] sd 8:0:0:3: Attached scsi generic sg6 type 0
[ 6.542717] sd 8:0:0:2: [sde] Attached SCSI removable disk
[ 6.545491] psmouse serio1: ID: 10 00 64
[ 6.545669] sd 8:0:0:3: [sdf] Attached SCSI removable disk
[ 6.546756] sr1: scsi-1 drive
[ 6.547032] sr 5:0:0:0: Attached scsi CD-ROM sr1
[ 6.547200] sr 5:0:0:0: Attached scsi generic sg7 type 5
[ 6.583781] parport_pc 00:06: reported by Plug and Play ACPI
[ 6.583933] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 6.676355] lp0: using parport0 (interrupt-driven).
[ 6.722716] usbcore: registered new interface driver usbserial
[ 6.722749] USB Serial support registered for generic
[ 6.723153] usbcore: registered new interface driver usbserial_generic
[ 6.723158] usbserial: USB Serial Driver core
[ 6.780738] ppdev: user-space parallel port driver
[ 6.808660] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.830816] USB Serial support registered for GSM modem (1-port)
[ 6.831528] option 1-6:1.0: GSM modem (1-port) converter detected
[ 6.833938] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB0
[ 6.834009] option 1-6:1.2: GSM modem (1-port) converter detected
[ 6.837052] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB1
[ 6.837113] option 1-6:1.3: GSM modem (1-port) converter detected
[ 6.862532] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB2
[ 6.862696] usbcore: registered new interface driver option
[ 6.862703] option: v0.7.2:USB Driver for GSM modems
[ 6.968770] Linux agpgart interface v0.103
[ 7.110969] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 7.306473] [drm] Initialized drm 1.1.0 20060810
[ 7.312888] agpgart: Detected VIA VT3314 chipset
[ 7.319942] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 7.709169] alloc irq_desc for 16 on node -1
[ 7.709175] alloc kstat_irqs on node -1
[ 7.709190] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.722340] [drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x034200b1)
[ 7.722456] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
[ 7.852661] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 7.852808] [drm] nouveau 0000:01:00.0: BMP BIOS found
[ 7.852812] [drm] nouveau 0000:01:00.0: BMP version 5.41
[ 7.852816] [drm] nouveau 0000:01:00.0: Bios version 04.34.20.87
[ 7.852820] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2
[ 7.852825] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01010300 000088b8
[ 7.852829] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000312 00008800
[ 7.852832] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02020321 00000403
[ 7.852941] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
[ 7.852946] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xED03
[ 7.868042] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xEF9E
[ 7.868055] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF0E4
[ 7.868096] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF26D
[ 7.868101] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF28A
[ 7.868107] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF2A7
[ 7.876078] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF440
[ 7.887321] [TTM] Zone kernel: Available graphics memory: 254454 kiB.
[ 7.887346] [drm] nouveau 0000:01:00.0: 128 MiB VRAM
[ 7.887437] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[ 7.887461] agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode.
[ 7.887472] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[ 7.887563] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
[ 7.887568] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[ 7.887921] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
[ 7.888961] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
[ 7.888977] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
[ 7.888986] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[ 7.929396] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[ 7.930008] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector
[ 7.930479] [drm] nouveau 0000:01:00.0: Detected a TV connector
[ 7.932065] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 7.932074] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 7.932079] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 2)
[ 8.100270] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo d671bc00
[ 8.100758] fb0: nouveaufb frame buffer device
[ 8.100765] registered panic notifier
[ 8.100781] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[ 8.142223] vga16fb: initializing
[ 8.142235] vga16fb: mapped to 0xc00a0000
[ 8.142244] vga16fb: not registering due to another framebuffer present
[ 8.696876] type=1505 audit(1283007160.876:2): operation="profile_load" pid=617 name="/sbin/dhclient3"
[ 8.697688] type=1505 audit(1283007160.876:3): operation="profile_load" pid=617 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 8.698126] type=1505 audit(1283007160.876:4): operation="profile_load" pid=617 name="/usr/lib/connman/scripts/dhclient-script"
[ 9.007516] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[ 9.007526] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
[ 9.019831] Console: switching to colour frame buffer device 160x64
[ 10.510593] alloc irq_desc for 22 on node -1
[ 10.510599] alloc kstat_irqs on node -1
[ 10.510613] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 10.510789] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 13.048227] type=1505 audit(1283007165.228:5): operation="profile_load" pid=890 name="/usr/share/gdm/guest-session/Xsession"
[ 13.058811] type=1505 audit(1283007165.236:6): operation="profile_replace" pid=900 name="/sbin/dhclient3"
[ 13.059678] type=1505 audit(1283007165.236:7): operation="profile_replace" pid=900 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 13.064836] type=1505 audit(1283007165.244:8): operation="profile_replace" pid=900 name="/usr/lib/connman/scripts/dhclient-script"
[ 13.161464] eth0: link down
[ 13.168257] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.383793] type=1505 audit(1283007165.560:9): operation="profile_load" pid=903 name="/usr/bin/evince"
[ 13.427424] type=1505 audit(1283007165.604:10): operation="profile_load" pid=903 name="/usr/bin/evince-previewer"
[ 13.451786] type=1505 audit(1283007165.628:11): operation="profile_load" pid=903 name="/usr/bin/evince-thumbnailer"
[ 13.702868] __ratelimit: 6 callbacks suppressed
[ 13.702873] type=1505 audit(1283007165.880:14): operation="profile_load" pid=1026 name="/usr/sbin/tcpdump"
[ 20.816791] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 20.817774] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 20.899292] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 20.919443] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[ 20.919450] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
[ 122.061119] type=1503 audit(1283007274.240:15): operation="open" pid=1727 parent=1723 profile="/usr/sbin/cupsd" requested_mask="w::" denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB0"
[ 122.061176] type=1503 audit(1283007274.240:16): operation="open" pid=1727 parent=1723 profile="/usr/sbin/cupsd" requested_mask="w::" denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB1"
[ 122.061218] type=1503 audit(1283007274.240:17): operation="open" pid=1727 parent=1723 profile="/usr/sbin/cupsd" requested_mask="w::" denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB2"
[ 300.016102] Machine check events logged
[ 336.433952] usb 1-6: USB disconnect, address 2
[ 336.434035] option: option_instat_callback: error -108
[ 336.438852] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 336.439117] option 1-6:1.0: device disconnected
[ 336.467648] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 336.469160] option 1-6:1.2: device disconnected
[ 336.485792] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 336.486080] option 1-6:1.3: device disconnected
[ 336.728275] scsi 5:0:0:0: rejecting I/O to dead device
[ 384.404079] usb 1-6: new high speed USB device using ehci_hcd and address 4
[ 384.547789] usb 1-6: configuration #1 chosen from 1 choice
[ 384.566711] scsi9 : SCSI emulation for USB Mass Storage devices
[ 384.577023] usb-storage: device found at 4
[ 384.577029] usb-storage: waiting for device to settle before scanning
[ 384.588701] scsi10 : SCSI emulation for USB Mass Storage devices
[ 384.596396] usb 1-6: USB disconnect, address 4
[ 384.604831] usb-storage: device found at 4
[ 384.604837] usb-storage: waiting for device to settle before scanning
[ 389.756377] usb 1-6: new high speed USB device using ehci_hcd and address 5
[ 389.891460] usb 1-6: configuration #1 chosen from 1 choice
[ 389.893325] option 1-6:1.0: GSM modem (1-port) converter detected
[ 389.893557] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB0
[ 389.919114] scsi12 : SCSI emulation for USB Mass Storage devices
[ 389.929090] usb-storage: device found at 5
[ 389.929096] usb-storage: waiting for device to settle before scanning
[ 389.932711] option 1-6:1.2: GSM modem (1-port) converter detected
[ 389.932960] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB1
[ 389.942194] option 1-6:1.3: GSM modem (1-port) converter detected
[ 389.942474] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB2
[ 394.928541] usb-storage: device scan complete
[ 394.929114] scsi 12:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 394.939117] sr1: scsi-1 drive
[ 394.939429] sr 12:0:0:0: Attached scsi CD-ROM sr1
[ 394.939629] sr 12:0:0:0: Attached scsi generic sg7 type 5
[ 611.863739] usb 1-6: USB disconnect, address 5
[ 611.863818] option: option_instat_callback: error -108
[ 611.870957] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 611.871236] option 1-6:1.0: device disconnected
[ 611.900519] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 611.902070] option 1-6:1.2: device disconnected
[ 611.912137] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 611.912429] option 1-6:1.3: device disconnected
[ 612.184281] scsi 12:0:0:0: rejecting I/O to dead device
[ 621.824055] usb 1-6: new high speed USB device using ehci_hcd and address 6
[ 621.967383] usb 1-6: configuration #1 chosen from 1 choice
[ 621.996695] scsi15 : SCSI emulation for USB Mass Storage devices
[ 622.005239] usb-storage: device found at 6
[ 622.005245] usb-storage: waiting for device to settle before scanning
[ 622.015971] scsi16 : SCSI emulation for USB Mass Storage devices
[ 622.025041] usb 1-6: USB disconnect, address 6
[ 622.033671] usb-storage: device found at 6
[ 622.033677] usb-storage: waiting for device to settle before scanning
[ 627.188054] usb 1-6: new high speed USB device using ehci_hcd and address 7
[ 627.322289] usb 1-6: configuration #1 chosen from 1 choice
[ 627.323738] option 1-6:1.0: GSM modem (1-port) converter detected
[ 627.323967] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB0
[ 627.352093] scsi18 : SCSI emulation for USB Mass Storage devices
[ 627.360398] usb-storage: device found at 7
[ 627.360404] usb-storage: waiting for device to settle before scanning
[ 627.361128] option 1-6:1.2: GSM modem (1-port) converter detected
[ 627.361391] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB1
[ 627.371321] option 1-6:1.3: GSM modem (1-port) converter detected
[ 627.371606] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB2
[ 632.361084] usb-storage: device scan complete
[ 632.361949] scsi 18:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 632.371970] sr1: scsi-1 drive
[ 632.372320] sr 18:0:0:0: Attached scsi CD-ROM sr1
[ 632.372523] sr 18:0:0:0: Attached scsi generic sg7 type 5
[ 761.196155] usbcore: deregistering interface driver option
[ 761.196274] option: option_instat_callback: error -108
[ 761.205205] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 761.206760] option 1-6:1.3: device disconnected
[ 761.207237] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 761.207410] option 1-6:1.2: device disconnected
[ 761.209797] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 761.222257] option 1-6:1.0: device disconnected
[ 761.222542] USB Serial deregistering driver GSM modem (1-port)
[ 781.694864] usb 1-6: USB disconnect, address 7
[ 782.044284] scsi 18:0:0:0: rejecting I/O to dead device
[ 791.928164] usb 1-6: new high speed USB device using ehci_hcd and address 8
[ 792.071681] usb 1-6: configuration #1 chosen from 1 choice
[ 792.077583] scsi21 : SCSI emulation for USB Mass Storage devices
[ 792.106738] usb-storage: device found at 8
[ 792.106743] usb-storage: waiting for device to settle before scanning
[ 792.119475] scsi22 : SCSI emulation for USB Mass Storage devices
[ 792.128430] usb 1-6: USB disconnect, address 8
[ 792.140803] usb-storage: device found at 8
[ 792.140809] usb-storage: waiting for device to settle before scanning
[ 797.292071] usb 1-6: new high speed USB device using ehci_hcd and address 9
[ 797.426708] usb 1-6: configuration #1 chosen from 1 choice
[ 797.430310] scsi24 : SCSI emulation for USB Mass Storage devices
[ 797.431060] usb-storage: device found at 9
[ 797.431065] usb-storage: waiting for device to settle before scanning
[ 797.545682] USB Serial support registered for GSM modem (1-port)
[ 797.547627] option 1-6:1.0: GSM modem (1-port) converter detected
[ 797.549102] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB0
[ 797.549162] option 1-6:1.2: GSM modem (1-port) converter detected
[ 797.553892] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB1
[ 797.553954] option 1-6:1.3: GSM modem (1-port) converter detected
[ 797.558107] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB2
[ 797.558196] usbcore: registered new interface driver option
[ 797.558200] option: v0.7.2:USB Driver for GSM modems
[ 802.432086] usb-storage: device scan complete
[ 802.432755] scsi 24:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 802.448997] sr1: scsi-1 drive
[ 802.449302] sr 24:0:0:0: Attached scsi CD-ROM sr1
[ 802.449510] sr 24:0:0:0: Attached scsi generic sg7 type 5
[ 1207.459881] usb 1-6: USB disconnect, address 9
[ 1207.459961] option: option_instat_callback: error -108
[ 1207.466970] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 1207.467204] option 1-6:1.0: device disconnected
[ 1207.491418] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 1207.491712] option 1-6:1.2: device disconnected
[ 1207.501163] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 1207.501337] option 1-6:1.3: device disconnected
[ 1207.884241] scsi 24:0:0:0: rejecting I/O to dead device
[ 1215.896066] usb 1-6: new high speed USB device using ehci_hcd and address 10
[ 1216.039766] usb 1-6: configuration #1 chosen from 1 choice
[ 1216.058347] scsi27 : SCSI emulation for USB Mass Storage devices
[ 1216.067164] usb-storage: device found at 10
[ 1216.067169] usb-storage: waiting for device to settle before scanning
[ 1216.078863] scsi28 : SCSI emulation for USB Mass Storage devices
[ 1216.090153] usb 1-6: USB disconnect, address 10
[ 1216.097998] usb-storage: device found at 10
[ 1216.098004] usb-storage: waiting for device to settle before scanning
[ 1221.260070] usb 1-6: new high speed USB device using ehci_hcd and address 11
[ 1221.394691] usb 1-6: configuration #1 chosen from 1 choice
[ 1221.396476] option 1-6:1.0: GSM modem (1-port) converter detected
[ 1221.396724] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB0
[ 1221.424316] scsi30 : SCSI emulation for USB Mass Storage devices
[ 1221.432080] usb-storage: device found at 11
[ 1221.432086] usb-storage: waiting for device to settle before scanning
[ 1221.432804] option 1-6:1.2: GSM modem (1-port) converter detected
[ 1221.433066] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB1
[ 1221.449682] option 1-6:1.3: GSM modem (1-port) converter detected
[ 1221.449965] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB2
[ 1226.432637] usb-storage: device scan complete
[ 1226.433469] scsi 30:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 1226.442715] sr1: scsi-1 drive
[ 1226.443023] sr 30:0:0:0: Attached scsi CD-ROM sr1
[ 1226.443228] sr 30:0:0:0: Attached scsi generic sg7 type 5

a to screeny z konfiguracji








[ Dodano: 2010-08-28, 16:38 ]
http://img840.imageshack.us/i/99085135.png/

http://img46.imageshack.us/i/77971465.png/

http://img137.imageshack.us/i/54114084.png/

http://img137.imageshack.us/i/54114084.png/

http://img709.imageshack.us/i/65386348.png/

http://img409.imageshack.us/i/46939714.png/

[ Dodano: 2010-08-28, 16:47 ]
o i jeszcze zapomniałem polecenie lsusb
szymon@szymon:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 058f:6362 Alcor Micro Corp. Hi-Speed 21-in-1 Flash Card Reader/Writer (Internal/External)
Bus 001 Device 002: ID 12d1:1401 Huawei Technologies Co., Ltd.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub