Mam router Tp- Link 4300. Do niego podpinam modem Huawei e3272 HiLink. Zainstalowałem obraz Gargoyle z linku: http://www.gargoyle-router.com/downloads/images/ar71xx/gargoyle_1.6.2-ar71xx-generic-tl-wdr4300-v1-squashfs-factory.bin. Wyczytałem, że mam zmienić interfejs sieciowy na inny niż domyślny. Problem w tym, że u mnie nie ma comboboxa z wyborem interfejsu... Spotkał się ktoś z czymś takim? Dioda modemu po podłączeniu do routera świeci na błękitny kolor, czyli jest połączenie z LTE.
Czy coś powinienem jeszcze doinstalować?
logread z routera po podłączeniu modemu:
Kod: Zaznacz cały
Jan 1 01:14:31 Gargoyle kern.info kernel: [ 348.080000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
Jan 1 01:14:31 Gargoyle kern.info kernel: [ 348.190000] scsi0 : usb-storage 1-1.1:1.0
Jan 1 01:14:31 Gargoyle user.notice usb-modeswitch: 1-1.1:1.0: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=FFFFFFFFFFFFFFFF
Jan 1 01:14:31 Gargoyle user.notice usb-modeswitch: 1-1.1:1.0: Selecting /etc/usb_modeswitch.d/12d1:1f01 for mode switching
Jan 1 01:14:31 Gargoyle syslog.notice usb_modeswitch: switch device 12d1:1f01 on 001/003
Jan 1 01:14:31 Gargoyle kern.warn kernel: [ 348.810000] usb 1-1.1: usbfs: process 2701 (usb_modeswitch) did not claim interface 0 before use
Jan 1 01:14:31 Gargoyle kern.info kernel: [ 348.870000] usb 1-1.1: USB disconnect, device number 3
Jan 1 01:14:32 Gargoyle kern.info kernel: [ 349.230000] usb 1-1.1: new high-speed USB device number 4 using ehci-platform
Jan 1 01:14:34 Gargoyle user.notice usb-modeswitch: 1-1.1:1.0: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
Jan 1 01:14:34 Gargoyle user.notice usb-modeswitch: 1-1.1:1.1: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
root@Gargoyle:~#
Kod: Zaznacz cały
root@Gargoyle:~# cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.03
S: Manufacturer=Linux 3.3.8 ehci_hcd
S: Product=Generic Platform EHCI Controller
S: SerialNumber=ehci-platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=05e3 ProdID=0608 Rev=85.36
S: Product=USB2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=14db Rev= 1.02
S: Manufacturer=HUAWEI Technology
S: Product=HUAWEI Mobile
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=06 Prot=00 Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
root@Gargoyle:~#Kod: Zaznacz cały
----------------------------------------------------------------|
| Gargoyle version 1.6.2 | OpenWrt Attitude Adjustment branch |
| Gargoyle revision b70bfc1 | OpenWrt revision r42171 |
| Built August 26, 2014 | Target ar71xx/usb |
